Thanks, yeah I will consider the options. Would be nice to have it in one as the raspberry pi is aging (it’s an original model B) and the gateway should be plenty powerful enough to run it, plus it would rule out the pi-hole to router connection as a possible reason for the unstable network.

I had been considering the Dream Machine Special Edition, though the website lists it as $500 but it’s gonna cost more like $750USD if I get it locally 😅. At least it’s available locally though, unlike some of the others listed in this thread which are gonna be hard to get.

Well I was hoping to spend the same amount and get one that does everything I wanted 😆. I’m happy with separating things if it make sense, but I have two power points and already have too many devices in that spot (fiber connection modem + ISP router + two raspberry pi’s (one for pi-hole, one for home assistant) + a switch + RF sensor for detecting doorbell + more I’m probably forgetting). Some of these are powered from USB ports on other ones. Being able to replace the ISP router with a gateway that’s also a switch that also handles the pi-hole would mean three of those devices become one, and it seems feasible!

Thanks! I’ll put it on my list 🙂

Thanks for all the info and the detailed response!

But it sounds like you only need it to be a wired router, which is good.

Correct, don’t need wifi.

PoE ports as a requirement is what narrows your options considerably I think

I’m happy with doing this through a separate switch, but I’m happier if I can have less things to plug in. It’s not a must have though.

Mikrotik has a lot of routers with PoE out. Their newest model in the RB5009 series can do either passive or 802.3af/at PoE out. Many of their older routers have passive PoE only. Make sure you know what your cameras need.

I don’t have cameras yet, but I’m considering some Reolink ones. Happy to take suggestions. Am I likely to find a lot of difference in the PoE type or are most things compatible with each other?

I’m not overly against keeping them separate. It’s just I have a lot of stuff piling up and consolidating would have been nice 😆

One of the things I use pi-hole for is to set customer DNS entries so anyone on the network will be redirected directly to the self hosted services when the type in the appropriate domain name. So it’s not just about the filtering (which I also want), but also the (network wide) custom DNS entries.

I’m also happy with simple. I’m not overly against keeping the pi-hole and gateway separate but was just wanting to know if combining them would be an option (which is sounds like it is, but not super easy).

It’s a little bit more complicated than I made out. For one, the network is super unstable and restarting the ISP router seems to fix it. I want to replace the router to test the theory that it’s the problem.

Secondly, this is a bring your own router to the ISP situation, but the router came from another ISP, but they are all the same ISP in the end because one company owns a whole bunch of ISPs and sends the same router to all the customers of all the child companies. Long story short, it’s the router they would have issued to me, but they didn’t, because a different subsidiary sent it to me before I changed ISPs to take advantage of a special because I live in a country where the lines are open and anyone can start an ISP using the existing lines but if you get big enough to be competition then the big company will buy you out and pretend it’s still a separate company. But if it doesn’t work well then it’s up to me to solve unless I am willing to pay the ~$10USD for them to send me the ISP router that is supported by them but it will be the same cheap router as I already have. Ok that’s not a very short story but that’s why it was easier to just call it an ISP router 😆

Thanks! I’ll check it out.

Thanks! It seems OpenWRT was the magic word I was needing.

Thanks, so what I should look for is a gateway running OpenWRT, which can run docker?

Well, every time assets get split between their 3 kids, you reduce the assets accumulated in one couple.

I have one of these: http://www.riitek.com/product/254.html

The back has a keyboard, the front has programmible buttons for the TV (mostly just used for on/off), and the rest is a bunch of buttons connected to the PC.

I use it with Kodi but it’s a pretty user friendly way to control it once it’s set up.

Haha, you never know if you’re talking to the Europeans that thing 1Gbps is slow, or the Americans that think 10Mbps is fast 😆

Oh speeds are great! Hundreds of Mbps. Depends on what you’re after. Not sure if they go into the Gbps, but I feel like I remember some locations do. My internet is only 300Mbps so can’t test higher. VPN speeds from a random local server are normally about 280Mbps. Not sure if that would be higher if my internet was faster.

I haven’t had any connection drops, and you can choose the location. Their guides also explain which locations work for streaming services if you want to check out the catalog from other countries. And they have specific servers that have P2P enabled if you want to use bittorrent.

I haven’t used Proton Drive for photos. It’s worth noting Proton Drive is a relatively new offering. The lack of Linux client is also a show stopper for me, as I don’t have a Windows computer to run it on. I’m keen to use it though when they get a client going.

The proton mail mobile app is fine, I use it and don’t have complaints. But I don’t like that I can’t use a different app if I want to 😆. It also doesn’t let you add other third party accounts into the app with IMAP so I have two apps while I transition.

I’ve used it, but haven’t used others so can’t compare!

What did you want to know?

I’ve recently signed up for Proton Unlimited, and have been playing with things. If you’re interested in the drive space, note there’s no Linux sync client (it’s Lemmy so I feel obligated to let you know), only the web client. There’s a windows client though.

The VPN is pretty easy. Log in, quick connect. Or manually select a server.

Needing bridge software for IMAP and having to use their email app on mobile is a bit annoying but it’s good enough that it’s fine.

I’ve found their help guides pretty good.

I have to admit I was surprised I couldn’t find anything. It seems like the technology should exist, like it should be a relatively common thing people want, and it doesn’t sound overly complicated.

I found a reddit post talking about it and most people used a spread sheet or a notebook!

Perhaps the Energise app might be enough? https://codeberg.org/epinez/Energize/

It’s on F-Droid, but is an app and not self-hosted. It also isn’t really what you’re looking for I don’t think, but I’m not aware of anything like what you describe.

I know it’s called Photon because of all the times I got it wrong. Easy mistake to make!

I believe blocking an instance hides posts from your feeds but nothing else, but it’s worth testing.

I have lemmit.online (reddit copy) blocked, but I can still search for a specific post and view it. I have also seen others complaining that when they bad an instance they still see comments from users on that instance, so at least at the moment it seems it just hides the posts from your feeds.