I would say that it realy depends on where you live, for Germany i would recommend eBay Kleinanzeigen.
So i live in Germany, and i just put a bag with silica over the active roll and call it a day. But it depends very much on the material you print with, i print PLA and that dosn’t pull much moisture out of the air.
The one bottom right is the best in my opinion.
In Germany we call it Hassliebe and it describes perfectly what i have with freecad (stupid import an stl way)
Maybe you can Print something Like this First layer Test (https://www.printables.com/de/model/252059-perfect-first-layer-test) so we can get a closer Look at your First layer
Two questions: how high is the nozzle away from the printbed when you Print the First layer and have you done a Testprint to check the bedlevel
Have you leveld the bed allready, it needs to have the right distance to the nozzle everywhere.
Blowing soap bubbles and accidently spilling half of the fluid.
Box of shame or hall of Fame, you decide where to hang this bricks frame