I’ll go with FreeCAD. I’ve known about it for a while and tried it about 5-10 years ago but have given it another look as I try to get back into CAD stuff and hate the restrictive licenses of commercial products. It has come a LONG way and is far more intuitive to use than it used to be.

I would actually rather like a Steam Deck without a display but with at least one full USB4 port and the ability to split it similar to a switch.

If it could use apple’s messages.app then i would be so happy.

That’s an Apple problem, not a Steam Deck or Linux problem. Apple refuses to allow support on non-Apple hardware.

I agree with you, to an extent. I would say it’s a lot more complicated than that with World of Warcraft, which is an MMO, and does not revolve on gambling except in the aspect of random number generated loot.

The way that the drops are is literally the same approach as a slot machine but with more steps to take up your time with boring shit and require more of your life to be dedicated to it so that there is less risk of you getting distracted by things like hobbies or games with finite stories with quality writing. A one-armed bandit might snag a handful of whales that spend all of their time feeding the machine. The Wrath of the Lich Bandit gets a much larger percentage of its users in front of it for a larger amount of their time, increasing the ratio of addicts/whales caught. Add in expansions, real money auctions, etc and you’ve got something much more fucked up than anything on a Vegas casino floor.

Do you think programming an ESP32 is a good project for learning rust?

I’ve only barely scratched the surface there myself but, I absolutely do think so. For several reasons. First, ESP32 is one of the few series of MCUs that support the Rust stdlib. And learning what that entails for Rust is extremely helpful in conceptualizing build targets. Second, MCUs are a very constrained target for software/firmware. Getting comfortable there will likely improve your code efficiency in other code platforms as you are more likely to think about resource usage earlier. And third, there’s some pretty excellent docs and tutorials.

Any suggested place to start? (Tutorials, YouTube Vida etc)

For tutorials, my recommended starting point is with the official docs/books themselves:

• https://doc.rust-lang.org/book/
• https://docs.rust-embedded.org/book/

You’ve received a lot of great advice that I’ve seen. Definitely getting labs would be a good first step. I’d suggest working with your therapist on this, honestly. Supposing that you’re not dealing with a deficiency or medication issue, it might be important to figure out how long you’ve been feeling this way, what way it is exactly that you’re feeling, and figuring out what to do about it.

That’s fair. To be clear, I meant minimal experience with the Rust programming language. I’ve mainly tinkered with ESP32 types of MCUs in Arduino and CircuitPython when it comes to firmware, but have much more software experience. In some ways, I found the little bit of Rust that I tried easier because of the tooling - defaulting to a CLI tool to flash rather than an IDE is much more comfortable for me.

If the target for the firmware has stdlib already implemented, my experience has been that it is indeed easy with minimal experience in the language.

And it has a pretty excellent stdlib.

I like Fira Code w/ Nerd Font patch.

Yes. They all have serial numbers, likely sequential so if a roll has serials 0005 through 00150 and some are stolen it should be very easy to tell. If the inventory records show 5 sales and only 00142 through 00150 are remaining, all cards from 00011 to 00141 can be safely assumed stolen and invalidated.

This is usually the cause, in my experience.

Well, it is a lot better than it used to be.

I’d say that it’s probably helping already. I am relearning CAD after near 20 years and it’s much improved over the last time I tried it around 2018.

FreeCAD, optionally with Ondsel.

Always the former. It’s a short form of regular expression, not rejular expression. But I don’t really judge others for their chosen pronunciation, as long as it’s understandable.

I enjoy your pronunciation! I’ve been using Linux primary for nearly 20 years now. Here’s my list:

Might be worth doing some file analysis. The big CO2 laser at my Makerspace has a “proprietary” format that is really just PostScript. Working around that stuff should be doable.

In the US, property owners do indeed have some degree of rights over low-altitude airspace. The FAA states that one should have permission before intentionally flying over private property. In addition, a large number of states and municipalities have drone-specific surveillance, harassment, and privacy laws, so, it’s a fair change that those may apply. Any commercial drone operator that violates local laws in course of their flight is likely to run into trouble with the FAA too.

What FOSS alternatives exist? This is exactly the reason not to rely on closed-source for hardware support.